Many people approach measuring fish with a relaxed approach and risk hefty fines, particularly if the fish is borderline size. There is no grey area when it comes to legal size of catch. Even the difference of 1cm can have you in trouble, and is just not worth the risk of a fine.

Sustainability needs to be taken very seriously, hence Fisheries have very clear guidelines. Sustainable fishing means that fish are harvested at a sustainable rate, so the fish population does not decline over time due to poor fishing practices. Imagine a world that is over-harvested and the corresponding devastation to the eco-system and to our future generations. It is the responsibility of each and every one of us to do our bit to protect the planet.

Size limits are typically based on biological research into the reproductive cycle of each species. Minimum size limits generally allow fish to spawn at least once and contribute to the population before they are taken.

The biggest mistake when measuring the length of your catch is where people don’t use a flat surface to measure the fish on. Ensure that if you use a mat, that it is not crumpled causing you to potentially overestimate the size of the fish. Adhesive or stick-on devices, when exposed to the weather, can shrink and become unreliable. Using a solid measuring implement is the best way.

As fish tend to contract if placed on ice, err on the side of caution and allow an extra inch at the initial measure.

Close the jaw of the fish to ensure an accurate reading. The overall measurement of a fish, whether it is fork tailed or round tailed, is taken from the outside of the snout on the upper jaw, to the extreme tip of the tail.

Your State Fisheries website will likely have an outline on how to measure an array of sea life e.g. crabs and squid as well as fish, so it might be worthwhile printing out a copy and keeping it in your tackle box for reference.

To assist in survival of your catch, avoid holding the belly area as you will almost certainly damage internal organs, which reduces chances of survival dramatically.

Never touch the fish’s gills as they are easily damaged.

Use a pair of long-nosed pliers, or a purpose made hook-release to quickly and efficiently remove the hook. If the fish has hooked deeply, cut the line as close to the hook as possible and leave the hook in the fish as it will probably do more damage trying to remove a deep hook than to leave it where it is.

A fish has no lungs so the moment it comes out of the water it stops ‘breathing’.

Research indicates that after landing a fish, keeping it out of the water for 30 seconds reduces the chances of survival by 30%, and 60 seconds out of the water reduces its survival by 70%.

Lastly, try to place the fish gently back into the water, as throwing it is also likely to greatly decrease the fish’s chances of survival.

Happy fishing!

Article Source:

Article Source:

By Larry Cole

Fly fishing techniques can be used on streams, rivers, ponds and lakes. Fly fishing works in salt water and fresh water, cold water and warm water. Fly fishing techniques can be broken down into sub-surface and on the surface. Sub-surface means fishing between the bottom of the stream and the surface of the water column. Cast the fly to a position in front of the path of a target fish. This position should be a point on either side of the fish but ahead of it. Casting a light fly like that is impossible with traditional fishing rods and casting is one of the most important skills a fly fisherman needs to grasp. Learning to cast is about commitment to the art. Cast out away from the boat or drop it directly over the side, straight down. Once the lure hits bottom pull it upward and let it free fall back to bottom. Cast it out, then retrieve it quickly through the water and the fish will throw themselves at it.

Rods were still heavy and clumsy, while the few existing reels were very simply constructed and quite small in comparison to the rods. The rotating spool lacked a brake and actually had only one function – to store the line on. Rods that are moderate to slow in action can also be used as they load easily and are pleasurable to cast for extended periods.

Anglers have been taught that the line should straighten completely at the end of a cast, but when you are casting downstream, this “proper” casting technique causes the fly to begin dragging immediately, making a dead drift impossible. My most skilled clients, those who were able to hook the fish in this pool, figured out that the key to this presentation was slack. Anglers started devising running line systems, where they could use shorter rods and longer lines. Eventually this led to the development of reels and the widespread use of shorter rods and reels. Anglers in North America additionally rise assorted literatures regarding to fly-fishing. The competition of fly-fishing as well as all these literatures gave North America the repute of being the hearth of dry fly-fishing, privately the City of Calgary, Alberta.

Generally, simply using weights on the leader or the fly line can do an adequate job of pulling down a wet fly to the right depth. Generally the Shimano reels are costly since they are manufactured from special materials and have a variety of features t. Generally, when a fly is cast for bass it should be allowed to remain unmoving for a longer period of time then for trout. It is estimated that 60% of bass strikes are made on a still fly. Nymph fishing, since the fly is underwater and is often extremely small, can test the abilities of any angler, and often leaves the beginner angler frustrated to extreme levels. Yet, the ability of have good nymph fishing technique is essential for productive trout fishing. Nymphing was best early. Karen had limited experience with streamer fishing and missed a number of fish but by late in the float she was an old pro, hooking trout almost every place she put the fly.

Bass fishing is also doing very well in this area with several 10lb bass fish surfacing last week. Raccoon Point is offering solid catfish fishing as well right now. Bass fishing has been quite good although the water levels dropped in such a huge hurry, the end of the season is already very near. The lower floats are done when the river is above 2000 cfs at the start of the trip and we have already hit that obviously. Bass dozer gets a small sales commission if you begin shopping at these stores from here. You always get the same low price you would pay anyway.

Trout are not very nice to each other. Trout’s living here are very spooky compared with the cousins living in slow moving and bigger waters. Highest care in the approach is necessary. Trout are fish, after all, and make different use of their senses than we do. Understanding these senses can greatly increase the prospects of a successful fly fishing trip. Trout behavior in lakes versus rivers versus streams can often be a real problem for even the most experienced fishermen.

Dry fly fishing is said to be the most pure method with which one can fool his quarry. I love nothing more than to watch a trout rise to my properly presented dry fly and then gently sip it in. Dry fly fishing is the best known and is considered the classic form. Using the dry fly fishing technique, the angler casts the fly in the hope that the trout rise up and bite the fly, as it introduces overhead. Dry fly fishing is the most familiar and is regarded as the classic form. Using the dry fly fishing technique, the angler casts the fly upstream hoping that the trout will rise up and bite the fly as it passes overhead. Wet fly fishing dates back hundreds of years, well before dry fly fishing came around. Wet fly fishing is one of the best ways for anglers to get introduced to sub-surface fishing. Unlike nymph and dry fly fishing, where skill, practice and precise imitations are needed to effectively take trout consistently, wet fly fishing can provide rewards quickly – even to beginner anglers.

Waders allow you to traverse waters and reach places you can not from the shore. Fly fishers spend a lot of time on the water, but most of the time it is IN the water. Waders will allow the angler to fish in toward, rather than out from, a bank, or even to wade beyond or around a submerged tree or other fish-harboring cover. Stream fly fishing is done in some of the most beautiful areas of the country. It is essential that we do everything we can to keep it that way. Streamers and buck tail flies do not imitate any part of the insects life cycle. These types of fly fishing flies are much larger and represent small bait fish such as sculpin minnows.

Basically, you should go light and not try to use a line that is overweight. If you have never done any casting before it may be necessary to get some lessons from a professional. Basically level and double tapers do not do well in saltwater fly fishing. This makes for an easier cast and stronger reel in.

Larry Cole

Looking for more information check out

Article Source:

By Charles A Beadon | Submitted On March 22, 2015

One of the most overlooked aspects of fly fishing is accuracy. For most of us we start out with the goal of just making a decent cast and then go head long into the quest for more distance; but in reality control and accuracy will put just as many fish on the end of the line as making a 90 foot cast. In fly casting there are a number of variances in style to include how we stand and how we hold the rod that can greatly affect accuracy. I would recommend that you work with the styles that you are most comfortable with but at the same time realize that different styles will give you advantages under different circumstances.

Let’s start with stance; if I were looking to make a long distance cast I would generally open up my feet allowing my left foot (I am a right handed caster) to be positioned forward of my shoulders and my right foot back, this would allow me to make the longest stroke of the rod on the forward and back cast. In contrast, if I were trying to make very accurate casts I would square my feet up directly under my shoulders or even allow my right foot to lead slightly to the target. This would allow me to sweep the fly rod directly overhead and down my line of sight towards the target thus giving me increased accuracy.

Moreover, how you hold the rod can also be varied to increase accuracy. The best two grips for accuracy casts would be to hold the rod with either the thumb on top of the rod or the forefinger on top of the rod. The forefinger grip is slightly more accurate but in many cases more fatiguing. From a fishing stand point the advantages of being an accurate caster are obvious, but while practicing you not only want to work on casting to targets but also casting in front of and beyond your targets to mimic leading a fish.

Look at your target as a moving fish and figure out what direction the fish is moving and try to place the fly two feet in front of and two feet beyond the target. If you get good accurately leading targets while practicing it will be like second nature while out fishing! This will be especially important as we approach the tailing fish or fish in very shallow water… when these fish are up on the flats nosing down on crabs or other crustaceans they are nearly oblivious to their surroundings which allows us to sneak in close for the perfect cast. In most cases, especially when wade fishing, we can get to within 20-30 feet of the fish before they spook off of the flat so under these circumstances a well controlled short cast will serve you very well. Until next time, Keep on Casting!

Casting for accuracy is a great way to put more fish on the end of your pole! You might also want to check out this video on accuracy casting at: or visit the website for Hilton Head Fishing Adventures where we list more tips and videos specifically tailored to fly fisherman.

Article Source:

Article Source: Inflatable Boats